News

• 

  303-41 What is the scope of application of hall flowmeter national standard GB1479？

  2024-06-13 aimsizer Powder Flow

  303-41 What is the scope of application of hall flowmeter national standard GB1479？ Hall flowmeter national standard GB1479 funnel method is only applicable to powder that can flow freely through a standard funnel with an aperture of 2.5mm or 5.0mm. AS-300A Hall Flowmeter︱Flow Meter Funnel︱Metal Pow ...

  Read more

• 

  510-112 The contact number of Beijing air jet sieve

  2024-06-13 aimsizer Particle Size

  The contact number of Beijing airflow sieve air jet sieve is to contact the Beijing sales agent of airflow sieve. But it is suggested to purchase the instrument directly from the manufacturer in order to save cost and buy a more cost-effective airflow sieve. HMKTest specializes in the production of ...

  Read more

• 

  301-29 VanKel Tapped Density Tester

  2024-06-13 aimsizer Powder Flow

  VanKel Tapped Density Meter VanKel Tapped Density Meter Varian Tapped Density Meter Agilent Tapped Density Meter The three instruments are the same series of tapped density meter： Model 50-1000(single platform) Model 50-1200(double platform) Model 50-2200(double platform) The performance of HMKT ...

  Read more

• 

  303-13 what is the requirement of the funnel of hall flowmeter?

  2024-06-13 aimsizer Powder Flow

  Funnel shall be made of non-magnetic material Funnel shall be made of corrosion-resistant metal material The funnel wall thickness should be sufficient The funnel should be hard enough The funnel should not deform The funnel should not be excessively worn the funnel is usually made of brass AS-300 ...

  Read more

• 

  510-70 Experimental sieve

  2024-06-13 aimsizer Particle Size

  Experimental sieve refers to the sieve used in laboratory. The general purpose is for experiment. The measured material is not too much, unlike industrial airflow sieve, which is very large. At present, there are not many domestic manufactures of experimental sieve. HMKTest is one of them. HMKTest p ...

  Read more

• 

  201-65 The working principle of average particle size analyzer

  2024-06-13 aimsizer Particle Size

  Fisher Sub Sieve Sizer Principle 201-1 After switching on the power of average particle size analyzer, the air pump starts to work. The compressed air passes through a filter to remove dust and impurities, and then stabilized by a voltage stabilizer, passes through a dryer composed of color-changin ...

  Read more

• 

  510-73 Automatic sieve HMK-200 Air Jet Sieve

  2024-06-13 aimsizer Particle Size

  High-end users usually choose automatic sieve. The automatic sieve can achieve the full automatic sieving of powder particles. The gap between imported automatic sieve and domestic sieve is obviously narrowing. HMKTest HMK-200 Touch Screen Intelligent Air Jet Sieve is a universal automatic sieve. It ...

  Read more

• 

  303-18 What is the requirement of second chronograph in hall flowmeter?

  2024-06-13 aimsizer Powder Flow

  The measurement time can be accurate to 0.2 second. AS-300A Hall Flowmeter︱Flow Meter Funnel︱Metal Powder Flow Rate︱Apparent Density︱Carney︱Manufacturer ...

  Read more

• 

  201-14 What are the fisher sub sieve sizer manufacturers in Dandong?

  2024-06-13 aimsizer Particle Size

  There are only one fisher sub sieve sizer manufacturers in Dandong. The manufacturers with reputation and good quality are Dandong HMKTest Instrument Co., Ltd, 201-14 What are the fisher sub sieve sizer manufacturers in Dandong? HMK-22 Fisher Sub-sieve Sizer and Fisher Scientific Sub-sieve Sizer ...

  Read more

• 

  303-42 When using the hall flowmeter, what is the problem if the flow time prolong?

  2024-06-12 aimsizer Powder Flow

  303-42 When using the hall flowmeter, what is the problem if the flow time prolong? When using hall flowmeter, if the flow time prolongs, it means there are soft powders attached to the wall of the hole. These attachments should be carefully removed and the test should be repeated. AS-300A Hall Flow ...

  Read more

• 

  301-27 Powder density meter and tapped density meter

  2024-06-12 aimsizer Powder Flow

  Powder density meter refers to powder true density meter, powder bulk density meter. The tapped density meter refers to one kind of the powder bulk density meters, which is widely used in testing the powder’s density after compaction. LABULK 0335 Tapped Density Tester︱Tap Density Tester︱Tapped Densi ...

  Read more

• 

  301-26 AUTOTAP tapped density meter

  2024-06-12 aimsizer Powder Flow

  AUTOTAP tapped density meter is an imported tapped density meter, the manufacturer is American Quantachrome which major business is physical adsorption instrument. This tapped density meter can be matched with single-barrel or double-barrel ( which is single vibration platform and double vibration p ...

  Read more