News

• 

  201-27 Fisher sub sieve sizer of HMKTest

  2024-06-26 aimsizer Particle Size

  HMKTest sells Fisher sub sieve sizer. The type is HMK-22. According to national standard GB3249-82 test method for particle size of refractory metals and compounds-fisher’s method (the maximum pressure of the powder sample is 22.7kg), this type of fisher sub sieve sizer increases the pressure displa ...

  Read more

• 

  Is the Fisher sub sieve sizer one of the micron particle size analyzer?201-44

  2024-06-26 aimsizer Particle Size

  The fisher sub sieve sizer is one of the micron particle size analyzers. The micron particle size refers to particle size of micron level. The particles from 0.1 micron to dozens of micron can be called micron level particles. The test range of fisher sub sieve sizer is 0.2-50 micron. So the fisher ...

  Read more

• 

  510-11 Is the Air Jet Sieve suitable for sieving nano particle?

  2024-06-26 aimsizer Particle Size

  Though the Air Jet Sieve can reduce the sieving lower limit to a few micrometers (in terms of some powders), its essence is also a kind of sieve mesh, it works according to sieving principle. Usually the minimum sieving can reach 45 micron. Ordinary laboratory sieve machine can hardly sieve the part ...

  Read more

• 

  510-24 Simple analysis of HMK-200 Air Jet Sieve’s new function-open sieve/open mesh function.

  2024-06-26 aimsizer Particle Size

  The air jet sieve is a kind of experimental sieve instrument. The instrument uses air flow to drive the particles through the corresponding mesh sieve, so as to achieve the purpose of sieving. As an indispensable sieving method in the sieving family, the air flow sieving instrument has been widely ...

  Read more

• 

  201-64 What does the water level of the pressure gauge of fisher sub sieve sizer?

  2024-06-26 aimsizer Particle Size

  During the measurement of the particle size analyzer, there are gaps between measured powder particles, and the compressed air will produce a certain pressure drop ΔP after passing through the measured powder layer. When the quality of the measured powder is constant, the larger the particles are, t ...

  Read more

• 

  Significance of Tapped Density and Tapped Density Tester 301-51

  2024-06-24 aimsizer Powder Flow

  Significance of Tapped Density and Tapped Density Tester 301-51 The Tapped Density and the Compacted Density The tapped density is significant. The most important is that through measuring the tapped density, the powder’s fluidity can be calculated. Second is that the tapped density can guide transp ...

  Read more

• 

  303-35 How is the correction coefficient of the hall flowmeter calculated?

  2024-06-24 aimsizer Powder Flow

  Assuming that the time for the 50g standard sample to flow out of the standard funnel is 40s, the correction coefficient of the funnel is 40.0 divided by the arithmetic mean of the 5 measurement results. AS-300A Hall Flowmeter︱Flow Meter Funnel︱Metal Powder Flow Rate︱Apparent Density︱Carney︱Manufact ...

  Read more

• 

  301-38 Which manufacturer of tapped density tester is better

  2024-06-24 aimsizer Powder Flow

  Which manufacturer of tapped density tester is better, you must be familiar with this topic. Because before you purchase a tapped density tester you will shop around and compared these products. You will compare from the following respects commonly: Tapped Density Tester is Tapped Density Analyzer o ...

  Read more

• 

  510-58 Special particle size distribution analyzer-air jet sieve for plastic materials N6-PA polyamide fiber (nylon)

  2024-06-24 aimsizer Particle Size

  Special particle size distribution analyzer-air jet sieve for plastic materials N6-PA polyamide fiber (nylon). Nylon 6 is polycaprolactam, and nylon 66 is 聚己二酸己二胺. Nylon 66 is 12% harder than nylon 6. In theory, the higher the hardness is, the more brittle the fiber is, and the easier it will break. ...

  Read more

• 

  201-34 Average particle size calculation fisher sub sieve sizer

  2024-06-24 aimsizer Particle Size

  Average particle size calculation method-average particle size calculation fisher sub sieve size process-average particle size calculation unit The average particle size is calculated by calculating the specific surface area derived from the flow velocity of the gas through the powder bed. HMK-2 ...

  Read more

• 

  303-1 What kind of instrument is the hall flowmeter?

  2024-06-24 aimsizer Powder Flow

  Hall flowmeter is a kind of flowmeter. It is different from other flowmeters. It can ‘t measure air or liquid’s flow rate. It is a laboratory instrument that can only measure the flow rate of powder. HMKTest is the world’s leading producer of hall flowmeter which not only produce manual hall flowmet ...

  Read more

• 

  510-101 Sieve shaker and Air Jet Sieve

  2024-06-24 aimsizer Particle Size

  The sieve shake is commonly used equipment in the laboratory, is the effective instrument to measure the particle size. It can be divided into the following types according to the working principle: Air jet sieving sieve shaker Eccentric sieve shaker Tapping and sieving method sieve shaker Electrom ...

  Read more