News

• 

  What is D90

  2024-07-09 aimsizercomblogadmin Particle Size

  D90 Particle Size D90 is particle size distribution D90, it represents the particle diameter corresponding to 90% cumulative (from 0 to 100%) undersize particle size distribution. In other words, if particle size D90 is 117.8um, we can say 90% of the particles in the tested sample are smaller than 1 ...

  Read more

• 

  510-36 0982 Test method of particle size and particle size distribution in Pharmacopoeia 2015 edition-HMKTest Air Jet Sieve

  2024-07-03 aimsizer Particle Size

  It is stipulated in pharmacopoeia 2015 edition that Air jet sieving method should be used in terms of samples with particle size less than 75μm. See the details below pharmacopoeia 2015 edition “particle size and particle size distribution test method”. In addition to meeting the requirements of pha ...

  Read more

• 

  What is Fisher Particle Size? 201-52

  2024-07-03 aimsizer Particle Size

  Fisher Particle Size is a kind of powder average particle size , the basic test method is Fisher air permeability method. That is, under the condition of constant air flow and pressure, measure the specific surface area and convert to average particle size. Fisher method is a relative particle size ...

  Read more

• 

  510 Air jet sieve openning (Metric) nominal

  2024-06-30 aimsizer Particle Size

  510 Air jet sieve openning (Metric) nominal AIR-200 Air Jet Sieve P/N 51298A Air Jet Sieve https://www.aimsizer.com/hmk-200-air-jet-sieve-sieving-machine-price-china-manufacturers.html ...

  Read more

• 

  Sieve analysis Alpine sieving machine AIR-200 Air Jet Sieve

  2024-06-29 aimsizer Particle Size

  AIR JET SIEVE Determination of the particle size of powder-form substances by a rotating stream of compressed air with the simultaneous application of a partial vacuum. Therefore the sample material is blown through the specified sieve. The residue which remains on the sieve is determined by weighin ...

  Read more

• 

  301-48 What is tapped density tester

  2024-06-28 aimsizer Powder Flow

  301-48 What is tapped density tester The tapped density meter is a commonly used instrument in laboratory, it is also a measurement tool which measure the powder’s tapped density. The measurement is accomplished by the following methods: first, weigh the powder and then pour it into a graduated meas ...

  Read more

• 

  301-53 How to verify the accuracy of the tapped density tester

  2024-06-28 aimsizer Powder Flow

  301-53 How to verify the accuracy of the tapped density tester The customers buy the tapped density tester. The manufacturer claims that the tapped density meter meets this or that domestic and international standards. As a customer , how to verify the accuracy of the tapped density tester? Generall ...

  Read more

• 

  201-40 Fisher sub sieve sizer and laser particle size analyzer

  2024-06-28 aimsizer Particle Size

  Both the fisher sub sieve sizer and laser particle size analyzer are used to measure the particle size of powder. There is no so called advanced or backward technology between them. They are both commonly used method of testing particle size. The HMKtest fisher sub sieve sizer is based on the Americ ...

  Read more

• 

  201-21 Which manufacturers produce domestic fisher sub sieve sizer?

  2024-06-28 aimsizer Particle Size

  Only HMKTest is manufacturer of Fisher sub sieve sizer. At the same time HMKTest supplies to all domestic distributors to expand his influence in this industry. fisher sub sieve sizer modle 95   HMK-22 Fisher Sub-sieve Sizer and Fisher Scientific Sub-sieve Sizer Model 95 Parts Supplier Price Ma ...

  Read more

• 

  201-56 Effect of molybdenum powder with different particle size on plates organization fisher sub sieve sizer

  2024-06-28 aimsizer Particle Size

  Molybdenum powder with different particle size and morphology was pressed and sintered to form slabs, and then rolling and annealing at different temperatures. Observe the microstructure and can find that: in the same sintering process, large particle size molybdenum powder and small particle size m ...

  Read more

• 

  301-4 What is the tapped tensity?

  2024-06-28 aimsizer Powder Flow

  The tapped density is one of the powder’s bulk density. The bulk density is about vibrating the powder in a container, usually a graduated measuring cylinder. After the vibration time, the vibration height and the frequency being carried out in strict accordance with the relevant international stand ...

  Read more

• 

  510-115 Determination of drug particle size by air jet sieving method

  2024-06-28 aimsizer Particle Size

  HMK-200 air jet sieve is often used in determination of drug particle size by air jet sieving method. This sieving instrument is the measurement method and equipment specified in the 2015 edition of Chinese pharmacopoeia. AIR-200 Air Jet Sieves︱Alpine Micron Air Jet Sieve ...

  Read more